详细信息
顶级刚性整体型龙门立柱,蜂窝型床身、滑鞍、工作台;机床结构经有限元 分析最佳化处理。是一款针对铝、铁鞋模加工,一次同时加工一双鞋模,或一次 加工两只相同鞋模,也可单头加工,配备高精度专用夹具,操作便捷,五面加工 只需拆装两次,底花一次,侧面一次,然后侧面可以四面旋转。大大减少装夹时 间。品质高、速度快缩小加工时间,对鞋模业有很高的性价比。
机床特结构:
*横梁采用三导轨支撑结构,提升机床的刚性和运动稳定性,保证精度。
Top overall gantry column rigid, cellular-type bed, sliding saddle, worktable; machine structure by finite element analysis of optimal processing. Is a target of aluminum, iron, shoe mold processing,while processing a pair of shoe mold, shoe moldora process of two identical, single-head processing can also be equipped with high precision fixture, convenient operation, the two five-face machining in a single removable times, the end of the first flower, side one, then side to four rotation. Signifi-cantly reduce the clamping time. High quality, fast processing time reduced, on the shoes mold industry has a high cost.
工作台面积 Area Of Worktable 320x600mm
X U Y Z W行程 X U Y Z WTravel 350x350x530x270x270mm
主轴端到工作台距离 Distance Of Main Shaft End And Worktable 0~240~500mm
加工最大承载量 Max. Carrying Capacity Of Processing 300kg
主轴型号 Model Of Main Shaft 电主轴,可加配气动拉刀装置 Electric Main Shaft Matched Pneumatic Broaching Device
主轴功率 Power Of Main Shaft 4.0KW/5.0KW
主轴冷却系统 Cooling System Of Main Shaft 水冷系统 Water-cooling System
主轴最大转速范围 Max. Speed Range Of Main Shaft 300~24000rpm/min
主轴加工转速范围 Processing Speed Range Of Main Shaft 5000~24000rpm/min
主轴锥孔ER32 Taper Hole ER32 Of Main Shaft ER32 (BT30)
伺服系统 Servo System 数字交流伺服电机Digital Ac Servo Motor
最大快移速度 Max. Swift-moving Speed 12000mm/min
最大加工速度 Max. Processing Speed 8000mm/min
数控系统 Numerical Control System 高速数控系统(中文版)High-speed Numerical Control System (Chinese Edition)
数控系统分辨率 Numerical Control System Exculpation Ratio 0.001mm
丝杆/导轨 Rod/guide Orbit 采用精密滚珠丝杆和直线导轨Use Exact Ball Rod and Line Guide Orbit
轴承 Bearing 采用精密滚珠丝杆专用轴承Use Special Bearing Of Exact Ball Rod
润滑系统 Lubricating System 自动润滑(20#机械油)Automatic Lubricating (20# Machine Oil)
机床总重 Gross Weight Of Machine Tool 3200kg
机床尺寸(长宽高) Dimension Of Machine Tool (length, Width, Height) 2000x2200x2300mm
电源总功率 Total Power Of Power Supply 16KW
选配:气动夹具或气紧夹具 4-90。(多角度 15。、30。、45。、60。、75。、90。)